Resources

Standard lumber and sheet sizes: nominal vs. actual

Knowing how your material is sold makes every plan realistic from the start. The sizes below are common at US lumberyards and home centers. They are a starting point, not a promise: stock varies, so always measure what you actually bought.

In short: Sheet goods are mostly sold as 4 × 8 ft (48 × 96 in), plus 2 × 4 ft and 4 × 4 ft project panels. Lumber is sold by nominal size: a 2×4 measures about 1½ × 3½ in and comes in 8, 10, 12 and 16 ft lengths, plus 92⅝ in precut studs. Measure what you bought before you plan.

CuttingFox does the math for you: enter your sizes and get a cutting plan, free and with no sign-up.Start planning →

Full sheet of plywood and dimensional lumber with a tape measure on a cutting table
Illustration, computer-generated

Dimensional lumber: nominal vs. actual

NominalActual (dry, surfaced)Common lengths
1×4¾ × 3½ in6, 8, 10, 12 ft
1×6¾ × 5½ in6, 8, 10, 12 ft
2×41½ × 3½ in8, 10, 12, 16 ft; precut studs 92⅝ in
2×61½ × 5½ in8, 10, 12, 16 ft

Sheet goods

Plywood, MDF, OSB and melamine are sold mainly as 4 × 8 ft sheets (48 × 96 in); many stores also stock 2 × 4 ft and 4 × 4 ft project panels. Thickness is nominal too: ¾ in plywood often measures 23/32 in and ½ in plywood 15/32 in.

Why measuring still matters

  • Factory edges get dinged in transport. Plan about ⅛ to ¼ in per side for a trim cut on edges that must be clean.
  • Boards are rarely cut to the exact listed length; an “8 ft” board is often a little longer. Enter the length you measured.
  • Lumber moves with moisture. Re-measure width and thickness when parts must fit tightly.

Entering your stock

  1. Measure each size once and note the usable dimensions.
  2. Enter identical pieces as one row with a quantity, offcuts as separate rows.
  3. Leave “Plan extra material” off when you want to use only what you have. The planner then shows which parts are missing.

Start planning