Example · Sheet cutting

Plywood shelving

A simple shelf from one 4 × 8 ft plywood sheet: two side panels and four shelves with straight, saw-ready cuts.

Open and edit in the planner

Free · No sign-up needed · Your data stays with you

Stock piece 1 / 1
Plywood sheet 4×8 1 · 96 × 48 in1 · Side panel40 × 121 · Side panel40 × 122 · Shelf24 × 1224 × 11 5/815 7/8 × 23 3/42 · Shelf24 × 122 · Shelf24 × 122 · Shelf24 × 1224 × 11 5/831 3/4 × 4896 in48 in

Result

  • 6 / 6 Parts placed
  • 1 Stock piece
  • 9 cuts
  • 45.8 % Material use
  • 0.26 ft² Saw loss
  • 31 3/4 × 48 in largest offcut

✓ Geometry independently validated

Your stock

  • Plywood sheet 4×8: 1 × 96 × 48 in · Available stock

Parts to cut

  • Side panel: 2 × 40 × 12 in
  • Shelf: 4 × 24 × 12 in

Rules

  • Material group: Plywood · 3/4 in
  • Saw kerf: 1/8 in
  • Edge trim: 0 in
  • Grain axis: No constraint
  • Allow 90° rotation: yes

Cutting sequence · Stock piece 1

  1. Piece 96 × 48 in: vertical cut 40 in from the left edge. Leaves 40 × 48 in and 55 7/8 × 48 in; kerf 1/8 in.
  2. Piece 40 × 48 in: horizontal cut 12 in from the top edge. Leaves 40 × 12 in and 40 × 35 7/8 in; kerf 1/8 in.
  3. Piece 40 × 35 7/8 in: horizontal cut 12 in from the top edge. Leaves 40 × 12 in and 40 × 23 3/4 in; kerf 1/8 in.
  4. Piece 40 × 23 3/4 in: vertical cut 24 in from the left edge. Leaves 24 × 23 3/4 in and 15 7/8 × 23 3/4 in; kerf 1/8 in.
  5. Piece 24 × 23 3/4 in: horizontal cut 12 in from the top edge. Leaves 24 × 12 in and 24 × 11 5/8 in; kerf 1/8 in.
  6. Piece 55 7/8 × 48 in: vertical cut 24 in from the left edge. Leaves 24 × 48 in and 31 3/4 × 48 in; kerf 1/8 in.
  7. Piece 24 × 48 in: horizontal cut 12 in from the top edge. Leaves 24 × 12 in and 24 × 35 7/8 in; kerf 1/8 in.
  8. Piece 24 × 35 7/8 in: horizontal cut 12 in from the top edge. Leaves 24 × 12 in and 24 × 23 3/4 in; kerf 1/8 in.
  9. Piece 24 × 23 3/4 in: horizontal cut 12 in from the top edge. Leaves 24 × 12 in and 24 × 11 5/8 in; kerf 1/8 in.

Sheet cutting optimizer →