Free · Boards & sheets

Sheet cutting optimizer

Rectangular parts from plywood, MDF, particle board and boards: CuttingFox places them on your sheets with straight through cuts and shows you every cut.

Free · No sign-up needed · Your data stays with you

Example · Plywood shelving6 / 6 parts
Plywood sheet 4×8 1 · 96 × 48 in1 · Side panel40 × 121 · Side panel40 × 122 · Shelf24 × 1224 × 11 5/815 7/8 × 23 3/42 · Shelf24 × 122 · Shelf24 × 122 · Shelf24 × 1224 × 11 5/831 3/4 × 4896 in48 in
✓ Geometry independently validated9 cuts

How to plan your sheet cuts

  1. Enter sheet size and quantity, for example 96 × 48 in, 1 sheet.
  2. Check the kerf of your saw.
  3. Add every part with length, width, quantity and label, or paste them from a spreadsheet.
  4. Lock rotation, set grain direction and edge trim where needed.
  5. Press “Calculate cutting plan”, check drawing and sequence, download the PDF.

What you enter

InputMeaning
Length × widthdimensions of the sheet or part, as you measure them
Store sizefills in common sheet sizes such as 4 × 8 ft with one click
Quantitysheets available or parts required
Kerfmaterial each separating cut removes
Edge trimdamaged edges removed first, per side
Rotation / grain axiswhether a part may rotate and which grain it follows
First cut on each sheetautomatic, rip or crosscut: the direction of the first through cut
Material groupkeeps different materials or thicknesses apart
Price per pieceoptional, for the material cost per part

What the cutting plan shows

  • a scaled drawing of each sheet with part number, label and size
  • a numbered cutting sequence with measuring point and resulting pieces
  • material use, saw loss and remaining area
  • usable offcuts with dimensions
  • unplaced parts with a reason

A deterministic heuristic compares several cutting strategies, and an independent validator checks every result for overlaps, dimensions, quantities and material balance. Global optimality is not promised.

Tips for less waste

  • Lock rotation only where grain is visible.
  • Add offcuts from earlier projects as extra sheets.
  • Create one material group per sheet thickness.

Reduce waste: 8 tips for better cutting plans →

Frequently asked questions

Which sheet sizes can I enter?

Any size up to 65 ft per side. Common sizes such as 4 × 8 ft (96 × 48 in) or 5 × 5 ft Baltic birch are only examples; enter the size of your actual sheet.

Can I cut the plans with a circular saw?

Yes. Every plan consists of straight cuts that split an existing rectangle completely. That works on a table saw, panel saw or with a track saw.

Can I choose the direction of the first cut?

Yes. Under “First cut on each sheet” choose “Rip” (the first through cut runs along the length, horizontal in the drawing) or “Crosscut” (along the width, vertical). The optimizer then starts every sheet with a cut in that direction after edge trimming and plans freely after that; in the numbered cutting sequence it is cut 1. The default is “Automatic”: the planner tries both directions and keeps the better one. A part as wide as the sheet only allows a rip cut and stays unplaced with a reason under “Crosscut” if it may not rotate.

Can parts be rotated?

Yes, per part. If a grain direction is set, parts only rotate in ways that keep the grain aligned.

What if my sheets are not enough?

Missing parts are listed with a reason. Optionally the app plans extra sheets and marks them as purchase suggestions.