How to make a cutting plan: from stock to printout
Make a cutting plan in six steps: measure your stock, enter parts, set the saw kerf, calculate, check unplaced parts and take a PDF to the saw.
GOOD TO KNOW
Short, practical guides on cutting, kerf and cutting plans. Every page explains what the app actually does.
Make a cutting plan in six steps: measure your stock, enter parts, set the saw kerf, calculate, check unplaced parts and take a PDF to the saw.
When to plan in 1D and when in 2D: lumber, tubing, boards and sheets compared, with examples and the simple rule for boards that are only cut to length.
What saw kerf is, how to measure it and why two 24 in parts do not fit on 48 in stock. With a worked example, edge trim and narrow end slivers.
When parts may rotate and when they must not: set grain direction for solid wood, veneer and decor panels in your cutting plan, with arrows in the drawing.
Plan with offcuts from your shop, use only the stock you have and get purchase suggestions only when you ask for them. How CuttingFox plans with real stock.
Paste a parts list from Excel or Google Sheets, import CSV from OpenCutList or Fusion 360, map columns and enter sizes as decimals or fractions like 12 3/8.
How to read your cutting plan: what guillotine cuts are, how the numbered cutting sequence works and where to measure from at the saw.
Less waste when cutting: eight practical tips on stock sizes, rotation, grain direction, offcuts and kerf – without promising unrealistic savings.
How CuttingFox calculates cutting plans and checks each one independently: strategies, kerf, rounding and the limits of the calculation.
Send us your question, a problem or a feature wish for the planner.