Resources

Plan a bookshelf: from sketch to cut list

A simple bookshelf is the classic first furniture project. Using a shelf 72 in tall, 32 in wide and 12 in deep made from ¾ in plywood, you will see how a sketch turns into a cut list the planner can use directly.

In short: Fix the outside size and construction, then subtract two material thicknesses for shelves between the sides: at 32 in wide with ¾ in plywood, the shelves are 30½ in long. Enter the parts with one material group for the case and one for the back; the furniture assistant builds the list straight from the outside size.

CuttingFox does the math for you: enter your sizes and get a cutting plan, free and with no sign-up.Start planning →

Handmade wooden bookshelf with books next to a dimensioned sketch
Illustration, computer-generated

1. Set the outside size and construction

Start with the outside dimensions and decide how the parts join. In this example the shelves, top and bottom sit between the sides. A ¼ in back is screwed on and covers the whole case.

2. Subtract the material thickness

Shelves sit between the sides, so their length is the outside width minus two thicknesses: 32 − 2 × ¾ = 30½ in. The sides run the full 72 in. Measure your actual plywood: at 23/32 in, the shelves become 30 9/16 in, or you will have a gap.

3. The cut list

PartSize (in)QtyMaterial
Side72 × 122¾ in plywood
Top and bottom30½ × 122¾ in plywood
Shelf30½ × 123¾ in plywood
Back72 × 321¼ in plywood

4. Calculate in the planner

  1. Create two material groups: ¾ in for the case and ¼ in for the back.
  2. Enter the parts with labels and lock rotation for veneered plywood so the grain runs the same way on every part.
  3. Set your saw’s kerf and calculate. The summary shows how many 4 × 8 sheets you need.
  4. Check the result, download the PDF and save the project.

Common pitfalls

  • Sag: at a 30½ in span under heavy books, a ¾ in shelf can sag over time. A hardwood strip under the front edge or thicker stock helps.
  • Tipping: anchor tall bookshelves to the wall.
  • Square back: an accurately cut back panel pulls the case square when you attach it.

Plan it with the furniture assistant