Help

How to make a cutting plan: from stock to printout

A good cutting plan starts with a tape measure, not a computer. This guide takes you in six steps from the stock you actually have to a printed plan you can follow at the saw.

In short: Measure the stock you really have, choose linear or sheet mode, enter every part with size, quantity and label, and set your blade’s kerf. CuttingFox then calculates the plan, checks it independently and gives you a PDF with the drawing, cutting sequence and offcuts.

CuttingFox does the math for you: enter your sizes and get a cutting plan, free and with no sign-up.Start planning →

The six steps at a glance

  1. Measure your stock: length, width and quantity of what is actually in the workshop.
  2. Choose a mode: linear for lumber, tubing and profiles; sheets for rectangular parts from panels and boards.
  3. Enter parts: dimension, quantity and a clear label such as “Side panel” or “Shelf”.
  4. Set the kerf: the width of your saw blade, not a guess.
  5. Calculate: the plan is created when you press “Calculate cutting plan”.
  6. Check and save: review unplaced parts, read the cutting sequence, download the PDF and save a project file.

1. Measure the stock you really have

Supplier sizes are nominal. A sheet sold as 4 × 8 ft may have damaged edges, and a board is rarely exactly the length on the label. Measure and enter the dimensions you can actually use.

Also enter the quantity you have. CuttingFox only plans with this stock by default. If it is not enough, you see exactly which parts are missing instead of a plan built on invented extra material.

2. Give parts meaningful labels

Label every part. The plan, the parts list and the PDF show number and label together, for example “2 · Shelf 600 × 300”, so you know at the saw where each piece belongs.

Enter identical parts once with the right quantity. If two parts differ only in their label, they stay separate rows; nothing is merged silently.

3. Kerf and further settings

The kerf field sits directly below your stock. Edge trim, grain direction, rotation, prices and multiple material groups live under “More settings”. For a first plan, dimensions, quantities and kerf are usually enough.

4. Check the result

  • Unplaced parts are shown first and listed with a reason: no matching material, dimensions do not fit or stock is insufficient.
  • The drawing shows every stock piece to scale with part number, label and size, plus the usable offcuts.
  • The cutting sequence describes each cut in plain words: which piece, where to measure from and what remains.
  • If you change a dimension afterwards, the plan is marked as outdated and PDF export is locked until you calculate again.
Plywood sheet 4×8 1 · 96 × 48 in1 · Side panel40 × 121 · Side panel40 × 122 · Shelf24 × 1224 × 11 5/815 7/8 × 23 3/42 · Shelf24 × 122 · Shelf24 × 122 · Shelf24 × 1224 × 11 5/831 3/4 × 4896 in48 in
The result of the plywood shelving example: every part with its number, label and size, the offcut in gray.

5. Print and save

The PDF is available in A4, US Letter and A3. It contains the stock and parts lists, the drawing, the cutting sequence and the offcuts. An incomplete plan is clearly marked on the first page.

Projects are saved automatically in your browser. Browser data can be cleared, so also save important projects as a project file. Check dimensions and blade width before cutting.

Start planning