
Plywood, MDF, particleboard or OSB? Sheet goods compared
Plywood, MDF, particleboard or OSB? Strengths, typical uses and what to watch for when you cut each type of sheet good.
SHOP KNOW-HOW
Shop know-how about materials, sizes and tools: what to know before you cut, so the plan and the project fit together.

Plywood, MDF, particleboard or OSB? Strengths, typical uses and what to watch for when you cut each type of sheet good.

Common US lumber and sheet sizes, why a 2×4 is not 2 by 4 inches, and how to enter your stock in the planner with real measurements.

Why total part area is not enough: plan for saw kerf, trim cuts, grain, defects and spares, and shop with a cutting plan instead of a guess.

Track saw, table saw, miter saw or jigsaw: which saw suits breaking down sheets and cutting boards to length, and which kerf to enter.

How to prepare for the store cutting service: a clear cut list, a plan with cutting sequence, what accuracy to expect and when to cut at home.

The most common measuring mistakes when cutting and how to avoid them: one tape, the right side of the line, checking square and test cuts.

Step by step from a bookshelf sketch to a cut list: set the outside size, subtract material thickness, label parts and calculate the plan.

Which edge banding suits which sheet, how much to buy and how to iron it on cleanly. Plus the right order and when to adjust your cut size.

Construction styles, the back, shelf-pin holes and the cut list: how to plan a plywood cabinet box and let the furniture assistant do the math.

How to store sheet and lumber offcuts so you can find them, decide what to keep, and plan offcuts into your next project.

How thick does a shelf need to be? Spans for particleboard, MDF, plywood and solid wood under books, with a chart and tips to stop shelves from sagging.
For how the planner itself works, see the help guides.