Example · Sheet cutting

Plywood shoe rack

A shoe rack 36 in tall, 32 in wide and 12 in deep from ¾ in plywood with three shoe shelves. The shelves sit between the sides and are 1 in shallower so the toes of the shoes have room. Everything fits on one 4 × 8 ft sheet.

Open and edit in the planner

Free · No sign-up needed · Your data stays with you

Stock piece 1 / 1
Plywood sheet 4×8 1 · 96 × 48 in1 · Side36 × 121 · Side36 × 12230 1/2 × 123 · Shoe shelf30 1/2 × 11230 1/2 × 123 · Shoe shelf30 1/2 × 113 · Shoe shelf30 1/2 × 1130 1/2 × 13 5/829 1/4 × 4896 in48 in

Result

  • 7 / 7 Parts placed
  • 1 Stock piece
  • 10 cuts
  • 56.5 % Material use
  • 0.30 ft² Saw loss
  • 29 1/4 × 48 in largest offcut

✓ Geometry independently validated

Your stock

  • Plywood sheet 4×8: 1 × 96 × 48 in · Available stock

Parts to cut

  • Side: 2 × 36 × 12 in
  • Top and bottom: 2 × 30 1/2 × 12 in
  • Shoe shelf: 3 × 30 1/2 × 11 in

Rules

  • Material group: Plywood · 3/4 in
  • Saw kerf: 1/8 in
  • Edge trim: 0 in
  • Grain axis: No constraint
  • Allow 90° rotation: yes

Cutting sequence · Stock piece 1

  1. Piece 96 × 48 in: vertical cut 36 in from the left edge. Leaves 36 × 48 in and 59 7/8 × 48 in; kerf 1/8 in.
  2. Piece 36 × 48 in: horizontal cut 12 in from the top edge. Leaves 36 × 12 in and 36 × 35 7/8 in; kerf 1/8 in.
  3. Piece 36 × 35 7/8 in: horizontal cut 12 in from the top edge. Leaves 36 × 12 in and 36 × 23 3/4 in; kerf 1/8 in.
  4. Piece 36 × 23 3/4 in: vertical cut 30 1/2 in from the left edge. Leaves 30 1/2 × 23 3/4 in and 5 3/8 × 23 3/4 in; kerf 1/8 in.
  5. Piece 30 1/2 × 23 3/4 in: horizontal cut 12 in from the top edge. Leaves 30 1/2 × 12 in and 30 1/2 × 11 5/8 in; kerf 1/8 in.
  6. Piece 30 1/2 × 11 5/8 in: horizontal cut 11 in from the top edge. Leaves 30 1/2 × 11 in and 30 1/2 × 1/2 in; kerf 1/8 in.
  7. Piece 59 7/8 × 48 in: vertical cut 30 1/2 in from the left edge. Leaves 30 1/2 × 48 in and 29 1/4 × 48 in; kerf 1/8 in.
  8. Piece 30 1/2 × 48 in: horizontal cut 12 in from the top edge. Leaves 30 1/2 × 12 in and 30 1/2 × 35 7/8 in; kerf 1/8 in.
  9. Piece 30 1/2 × 35 7/8 in: horizontal cut 11 in from the top edge. Leaves 30 1/2 × 11 in and 30 1/2 × 24 3/4 in; kerf 1/8 in.
  10. Piece 30 1/2 × 24 3/4 in: horizontal cut 11 in from the top edge. Leaves 30 1/2 × 11 in and 30 1/2 × 13 5/8 in; kerf 1/8 in.

Sheet cutting optimizer →