Example · Sheet cutting

TV stand with two doors

A TV stand 48 in wide, 18 in high and 15 in deep with a center divider, two shelves and two overlay doors from one 4 × 8 ft sheet of ¾ in plywood. Top and bottom run through, the sides sit between them.

Open and edit in the planner

Free · No sign-up needed · Your data stays with you

Stock piece 1 / 1
Plywood sheet 4×8 1 · 96 × 48 in5 · Door5 · Door1 · Top and bottom48 × 151 · Top and bottom48 × 152 · Side2 · Side14 5/8 × 1534 · Shelf22 7/8 × 144 · Shelf22 7/8 × 1433 3/8 × 1496 in48 in

Result

  • 9 / 9 Parts placed
  • 1 Stock piece
  • 13 cuts
  • 79.3 % Material use
  • 0.41 ft² Saw loss
  • 33 3/8 × 14 in largest offcut

✓ Geometry independently validated

Your stock

  • Plywood sheet 4×8: 1 × 96 × 48 in · Available stock

Parts to cut

  • Top and bottom: 2 × 48 × 15 in
  • Side: 2 × 16 1/2 × 15 in
  • Center divider: 1 × 16 1/2 × 14 in
  • Shelf: 2 × 22 7/8 × 14 in
  • Door: 2 × 23 13/16 × 17 3/4 in

Rules

  • Material group: Plywood · 3/4 in
  • Saw kerf: 1/8 in
  • Edge trim: 0 in
  • Grain axis: No constraint
  • Allow 90° rotation: yes

Cutting sequence · Stock piece 1

  1. Piece 96 × 48 in: horizontal cut 17 3/4 in from the top edge. Leaves 96 × 17 3/4 in and 96 × 30 1/8 in; kerf 1/8 in.
  2. Piece 96 × 17 3/4 in: vertical cut 23 13/16 in from the left edge. Leaves 23 13/16 × 17 3/4 in and 72 1/16 × 17 3/4 in; kerf 1/8 in.
  3. Piece 72 1/16 × 17 3/4 in: vertical cut 23 13/16 in from the left edge. Leaves 23 13/16 × 17 3/4 in and 48 1/8 × 17 3/4 in; kerf 1/8 in.
  4. Piece 48 1/8 × 17 3/4 in: horizontal cut 15 in from the top edge. Leaves 48 1/8 × 15 in and 48 1/8 × 2 5/8 in; kerf 1/8 in.
  5. Piece 48 1/8 × 15 in: vertical cut 48 in from the left edge. Leaves 48 × 15 in; kerf 1/8 in.
  6. Piece 96 × 30 1/8 in: horizontal cut 15 in from the top edge. Leaves 96 × 15 in and 96 × 15 in; kerf 1/8 in.
  7. Piece 96 × 15 in: vertical cut 48 in from the left edge. Leaves 48 × 15 in and 47 7/8 × 15 in; kerf 1/8 in.
  8. Piece 47 7/8 × 15 in: vertical cut 16 1/2 in from the left edge. Leaves 16 1/2 × 15 in and 31 1/4 × 15 in; kerf 1/8 in.
  9. Piece 31 1/4 × 15 in: vertical cut 16 1/2 in from the left edge. Leaves 16 1/2 × 15 in and 14 5/8 × 15 in; kerf 1/8 in.
  10. Piece 96 × 15 in: horizontal cut 14 in from the top edge. Leaves 96 × 14 in and 96 × 7/8 in; kerf 1/8 in.
  11. Piece 96 × 14 in: vertical cut 16 1/2 in from the left edge. Leaves 16 1/2 × 14 in and 79 3/8 × 14 in; kerf 1/8 in.
  12. Piece 79 3/8 × 14 in: vertical cut 22 7/8 in from the left edge. Leaves 22 7/8 × 14 in and 56 3/8 × 14 in; kerf 1/8 in.
  13. Piece 56 3/8 × 14 in: vertical cut 22 7/8 in from the left edge. Leaves 22 7/8 × 14 in and 33 3/8 × 14 in; kerf 1/8 in.

Sheet cutting optimizer →