Help
Reduce waste: 8 tips for better cutting plans
How much material you save depends mainly on what you enter. These tips help you get better plans from CuttingFox.
In short: Enter real dimensions instead of nominal ones, allow rotation where appearance permits, list every stock size and offcut you have and measure your kerf. The calculation prefers complete plans, then less stock, then useful offcuts; it promises no fixed percentage savings.
Updated November 11, 2026 · CuttingFox team
CuttingFox does the math for you: enter your sizes and get a cutting plan, free and with no sign-up.Start planning →
Eight tips
- Enter real dimensions, not nominal ones: a 2×4 is 1 1/2 × 3 1/2 in, and plywood sold as 3/4 in is often 23/32 in thick. A fraction of an inch often decides whether another part fits on a sheet.
- Allow rotation where appearance permits. Only parts with visible grain need a fixed direction.
- List every stock size you have. With different lengths available, the calculation often finds better combinations.
- Enter offcuts first. A leftover from the last project can save a new sheet.
- Measure your kerf. An oversized kerf wastes noticeable material across many cuts.
- Trim edges only where needed. Clean factory edges need no trimming cut.
- Do not split large parts artificially, but keep small parts as separate rows. Small parts fill gaps next to large ones.
- Compare variants. Change one assumption, calculate again and compare stock used and usable offcuts.
What the figures mean
The calculation prefers complete plans first, then less stock, then useful offcuts. It promises neither a mathematically optimal solution nor fixed percentage savings.
- Material use: share of part area or length in the stock used.
- Saw loss: material actually removed by kerfs.
- Remaining: everything left after parts, trim and kerf, part of it as usable offcuts.
When an extra piece makes sense
If your stock is just short, enable “Plan additional stock”. You then see how many pieces of which size are missing, clearly separated from what you already have.