Example · Sheet cutting

Entryway bench with coat panel

An entryway bench with a coat panel from ¾ in plywood: a 40 × 36 in panel for hooks, a hat shelf and a bench with seat, two sides and a shoe shelf, all from one 4 × 8 ft sheet. The bench sides are shorter by the seat thickness so the bench ends up 18 in high.

Open and edit in the planner

Free · No sign-up needed · Your data stays with you

Stock piece 1 / 1
Plywood sheet 4×8 1 · 96 × 48 in1 · Coat panel40 × 3640 × 11 7/82 · Seat40 × 165 · Hat shelf40 × 12317 1/4 × 16317 1/4 × 16415 × 9 3/896 in48 in

Result

  • 6 / 6 Parts placed
  • 1 Stock piece
  • 11 cuts
  • 80.1 % Material use
  • 0.31 ft² Saw loss
  • 40 × 11 7/8 in largest offcut

✓ Geometry independently validated

Your stock

  • Plywood sheet 4×8: 1 × 96 × 48 in · Available stock

Parts to cut

  • Coat panel: 1 × 40 × 36 in
  • Seat: 1 × 40 × 16 in
  • Bench side: 2 × 17 1/4 × 16 in
  • Shoe shelf: 1 × 38 1/2 × 15 in
  • Hat shelf: 1 × 40 × 12 in

Rules

  • Material group: Plywood · 3/4 in
  • Saw kerf: 1/8 in
  • Edge trim: 0 in
  • Grain axis: No constraint
  • Allow 90° rotation: yes

Cutting sequence · Stock piece 1

  1. Piece 96 × 48 in: vertical cut 40 in from the left edge. Leaves 40 × 48 in and 55 7/8 × 48 in; kerf 1/8 in.
  2. Piece 40 × 48 in: horizontal cut 36 in from the top edge. Leaves 40 × 36 in and 40 × 11 7/8 in; kerf 1/8 in.
  3. Piece 55 7/8 × 48 in: vertical cut 40 in from the left edge. Leaves 40 × 48 in and 15 3/4 × 48 in; kerf 1/8 in.
  4. Piece 40 × 48 in: horizontal cut 16 in from the top edge. Leaves 40 × 16 in and 40 × 31 7/8 in; kerf 1/8 in.
  5. Piece 40 × 31 7/8 in: horizontal cut 12 in from the top edge. Leaves 40 × 12 in and 40 × 19 3/4 in; kerf 1/8 in.
  6. Piece 40 × 19 3/4 in: vertical cut 17 1/4 in from the left edge. Leaves 17 1/4 × 19 3/4 in and 22 5/8 × 19 3/4 in; kerf 1/8 in.
  7. Piece 17 1/4 × 19 3/4 in: horizontal cut 16 in from the top edge. Leaves 17 1/4 × 16 in and 17 1/4 × 3 5/8 in; kerf 1/8 in.
  8. Piece 22 5/8 × 19 3/4 in: vertical cut 17 1/4 in from the left edge. Leaves 17 1/4 × 19 3/4 in and 5 1/4 × 19 3/4 in; kerf 1/8 in.
  9. Piece 17 1/4 × 19 3/4 in: horizontal cut 16 in from the top edge. Leaves 17 1/4 × 16 in and 17 1/4 × 3 5/8 in; kerf 1/8 in.
  10. Piece 15 3/4 × 48 in: vertical cut 15 in from the left edge. Leaves 15 × 48 in and 5/8 × 48 in; kerf 1/8 in.
  11. Piece 15 × 48 in: horizontal cut 38 1/2 in from the top edge. Leaves 15 × 38 1/2 in and 15 × 9 3/8 in; kerf 1/8 in.

Sheet cutting optimizer →