Help

Import tables from Excel and work with inch fractions

Is your parts list already in a spreadsheet? Then there is nothing to retype. Select the rows, copy them and paste them into the planner.

In short: Select the rows in Excel or a CAD cut list, copy them and paste them into the planner under “Paste table / CSV”. Columns such as length, width, quantity and label are recognized, and the preview shows every row it read. Fractions such as 12 3/8 work in inches.

CuttingFox does the math for you: enter your sizes and get a cutting plan, free and with no sign-up.Start planning →

Paste from a spreadsheet

  1. Select the rows with length, width, quantity and label in your spreadsheet, with or without a header row.
  2. Open “Paste table / CSV” in the planner and paste into the text field.
  3. Press “Check preview”. Every row is shown with the dimension that was read and a status.
  4. Check the column mapping and add the parts with “Add as new parts”.

Recognised column names

MeaningRecognised names
LengthLength, Len, L – also with a unit such as “Length (in)”
WidthWidth, Height, Depth
QuantityQuantity, Qty, Pcs, Count
LabelLabel, Name, Part, Description

Without a header row, columns are mapped in the usual order: length, width, quantity, label. A notice then asks you to check the mapping.

Cut lists from CAD programs

Exports from SketchUp with OpenCutList and cut lists from Fusion 360 paste in the same way. The import recognizes their columns, such as "Cutting length" or "Material name", and understands units in the cells, such as "600 mm", "60 cm" or 1′ 11 1/2″. A unit in the cell takes priority over the project unit.

Material and thickness columns create material groups; the preview names the new groups. Afterwards, add matching stock for them in the planner, otherwise those parts have nothing to be cut from.

Delimiters and decimals

Tab, semicolon and comma are detected. Copying from a spreadsheet produces tabs. If a CSV file uses decimal commas, separate fields with semicolons. Quoted fields protect delimiters inside a label.

Inches, feet and fractions

Choose the unit before importing. In inches the planner accepts decimals such as 23.375, simple fractions such as 3/4 and mixed numbers such as 12 3/8. Input fields also display inch values as fractions whenever the value is exactly a 1/64 fraction.

Internally CuttingFox works in hundredths of a millimeter and rounds every input exactly once; plans show inches as fractions down to 1/64 in. Switching the display unit or the language never changes a dimension.

Invalid rows

Values that cannot be read are flagged in the preview and never silently imported as zero. While a row is invalid, adding is locked. Fix the source or the mapping and check the preview again.

Start planning