Calculators

Shelf sag calculator: will my shelf bow?

Enter the span, depth and thickness of the shelf, the load and the material. The calculator shows how far the shelf sags right away and after a few months, and which load or span still looks straight.

Free · No sign-up needed · Your data stays with you

0.05 inSag right away
0.09 inSag after months
0.033 inper foot of span
23 lbLoad up to the limit (1/600)
26 3/4 inSpan for the same load per foot

Visible sag: over time more than 1/600 but less than 1/300 of the span. A shorter span, a thicker shelf or a stiffer material helps.

How the calculator works

  • The shelf rests on two supports with the load spread evenly, like a row of books. The calculator uses the formula for a simply supported beam: sag = 5 × load × span³ / (384 × stiffness × moment of inertia).
  • Wood and wood panels keep sagging under a load that stays (creep). For the value after months, the calculator raises the sag with the creep factors Eurocode 5 uses for dry indoor rooms: about 3.25 times for particleboard and MDF, 1.8 times for plywood and 1.6 times for solid wood.
  • The limit is 1/600 of the span, 0.02 in per foot. Below that, sag is hard to see. Stiffness values are typical figures; individual panels vary. The calculator is not a structural design.

Frequently asked questions

How much do books weigh on a shelf?

Usually 15 to 20 lb per foot of shelf, more for large art books. When in doubt, weigh a stack and scale it to the shelf length.

What helps when a shelf is too flexible?

A shorter span helps most, because it counts to the third power: a third shorter more than halves the sag. After that, a thicker shelf, a stiffer material such as Baltic birch or a hardwood strip glued on edge along the front.

Why is particleboard so much weaker than Baltic birch?

Particleboard is less stiff and creeps more under a lasting load. At the same thickness it sags more than five times as much as Baltic birch after a few months.