Calculators
Deck board calculator: boards, joists and screws
Enter the length and depth of the deck, the board width, the gap and the board length you buy. The calculator works out the rows, spreads the pieces across the boards and estimates joists and screws.
Free · No sign-up needed · Your data stays with you
22Board rows
1 × 144Pieces per row (in)
22Boards to buy
10 × 120Joists (in)
440Screws (2 per crossing)
How the calculator works
- Deck boards run along the deck length. The number of rows follows from deck depth, board width and gap.
- When a row is longer than one board, the calculator splits it into equal pieces. Every butt joint must land on a joist.
- Joists run across the boards at the spacing you enter. The calculator counts two screws where each board crosses a joist.
Frequently asked questions
What joist spacing do I need?
Commonly 16 in on center, sometimes 12 in for composite boards or diagonal layouts. Follow the board manufacturer and your local building code.
How wide should the gap be?
Typically 3/16 to 1/4 in so water drains and the wood can move. Follow the manufacturer for composite boards.
Is waste included?
Yes, as far as cutting to length goes: kerf and offcuts come from the layout. Add about 5 to 10 % for miscuts and defects.