Calculators

Plywood sheet calculator: how many sheets do I need?

Enter the sheet size, part size and quantity. The calculator lays out the parts with the same engine as the planner and shows how many sheets you actually need.

Free · No sign-up needed · Your data stays with you

1Sheet needed
1Lower bound by area
12Parts on one sheet (max.)
72.7 %Yield
Stock piece 1 · 96 × 48 in123 3/4 × 11 3/4123 3/4 × 11 3/4123 3/4 × 11 3/4123 3/4 × 11 3/4123 3/4 × 11 3/4123 3/4 × 11 3/4123 3/4 × 11 3/4123 3/4 × 11 3/4123 3/4 × 11 3/4123 3/4 × 11 3/4123 3/4 × 11 3/4123 3/4 × 11 3/424 3/8 × 4896 in48 in

How the calculator works

  • Dividing part area by sheet area only gives a lower bound. Kerf and the shape of the parts almost always leave some material unused.
  • So the calculator places the parts with straight through cuts, subtracts the kerf for every cut and checks the result independently.
  • For mixed parts, offcuts, trim cuts and grain direction, open the result in the planner and add more rows there.

Frequently asked questions

Why is the area estimate not enough?

Because parts cannot be split. If only three parts fit across a sheet, the strip that is left is too narrow for a fourth. The calculator accounts for that and for the kerf.

What kerf should I enter?

The width of your saw blade, typically ⅛ in for a table saw or circular saw. Thin-kerf blades are about 3/32 in. When in doubt, enter a little more.

How do I plan for spare material?

If the result is tight, buy one extra sheet in case of damaged edges or a miscut. In the planner you can also set a trim cut per side.