Calculators

2×4 cut list calculator: how many boards do I need?

Enter the length and quantity of your cuts and up to three board lengths your store sells. The calculator lays out the cuts with the same engine as the planner, compares every length and a mix, and shows the option with the least lumber.

Free · No sign-up needed · Your data stays with you

Piece 1
Piece 2
Piece 3
Piece 4
Lengths on sale

Empty fields (0) are not used. With a price for every length the calculator picks the cheapest option, otherwise the one with the least lumber.

3Boards
36.0 ftbought
6.9 %Waste
BuyBoardsboughtWaste
only 8 ft540.0 ft16.2 %
only 10 ft440.0 ft16.2 %
only 12 ft · ✓ best choice336.0 ft6.9 %
2×4 12 ft 1 · 144 in2452452458 5/8144 in2×4 12 ft 2 · 144 in245134 1/2134 1/23218 1/2144 in2×4 12 ft 3 · 144 in134 1/2134 1/232132132111 3/8144 in

How the calculator works

  • For each board length the calculator puts all cuts on as few boards as possible and subtracts the kerf after every cut. It lists a mix of lengths only when the mix really needs less lumber.
  • Waste is the part of the lumber you buy that does not end up in your cuts: saw kerfs and offcuts. Short offcuts often still work as blocking or spacers.
  • Home centers usually stock 2×4s in 8, 10, 12 and 16 ft, plus precut studs of 92 5/8 in for 8 ft walls. Enter the lengths your store carries and the price per board, since the price per foot differs between lengths. With a price for every length, the calculator picks the cheapest option. Long boards also do not fit in every car.

Frequently asked questions

How big is a 2×4 really?

About 1½ × 3½ in. The length is close to the nominal length, but ends can be split or out of square. If the result is tight, enter the board length an inch shorter to leave room for squaring the ends.

What kerf should I enter?

The width of your saw blade, about ⅛ in for most circular saw and miter saw blades. Thin-kerf blades are about 3/32 in.

What if a cut is longer than any board?

The calculator cuts every piece from one board. Split a longer piece into two pieces that join over a support and enter both.