Example · Linear cutting

Workbench frame

The frame of a 60 × 30 in workbench from 2×4s: four legs, four long rails and four short rails. The top is a separate sheet and not part of the linear cut list.

Open and edit in the planner

Free · No sign-up needed · Your data stays with you

Stock piece 1 / 4
2×4, 10 ft 1 · 120 in1 · Leg34 1/21 · Leg34 1/2323323120 in
Stock piece 2 / 4
2×4, 10 ft 2 · 120 in1 · Leg34 1/21 · Leg34 1/2323323120 in
Stock piece 3 / 4
2×4, 10 ft 3 · 120 in2 · Long rail532 · Long rail5313 3/4120 in
Stock piece 4 / 4
2×4, 10 ft 4 · 120 in2 · Long rail532 · Long rail5313 3/4120 in

Result

  • 12 / 12 Parts placed
  • 4 Stock pieces
  • 12 cuts
  • 92.1 % Material use
  • 1 1/2 in Saw loss
  • 13 3/4 in largest offcut

✓ Geometry independently validated

Your stock

  • 2×4, 10 ft: 5 × 120 in · Available stock

Parts to cut

  • Leg: 4 × 34 1/2 in
  • Long rail: 4 × 53 in
  • Short rail: 4 × 23 in

Rules

  • Material group: SPF · 2×4
  • Saw kerf: 1/8 in
  • Edge trim: 0 in

Cutting sequence · Stock piece 1

  1. Piece 120 in: cut at 34 1/2 in from the start. Leaves 34 1/2 in and 85 3/8 in; kerf 1/8 in.
  2. Piece 85 3/8 in: cut at 34 1/2 in from the start. Leaves 34 1/2 in and 50 3/4 in; kerf 1/8 in.
  3. Piece 50 3/4 in: cut at 23 in from the start. Leaves 23 in and 27 5/8 in; kerf 1/8 in.
  4. Piece 27 5/8 in: cut at 23 in from the start. Leaves 23 in and 4 1/2 in; kerf 1/8 in.

Linear cutting optimizer →