Example · Linear cutting
Deck boards from two lengths
Deck boards for a 90 in deep deck from 16 ft and 12 ft boards. The example shows how two stock lengths are combined and which offcuts remain for fascia or steps.
Open and edit in the plannerFree · No sign-up needed · Your data stays with you
Result
- 14 / 14 Parts placed
- 9 Stock pieces
- 14 cuts
- 82.0 % Material use
- 1 3/4 in Saw loss
- 53 7/8 in largest offcut
✓ Geometry independently validated
Your stock
- Deck board, 16 ft: 5 × 192 in · Available stock
- Deck board, 12 ft: 5 × 144 in · Available stock
Parts to cut
- Board row: 14 × 90 in
Rules
- Material group: Pressure-treated · 5/4×6
- Saw kerf: 1/8 in
- Edge trim: 0 in
Cutting sequence · Stock piece 1
- Piece 192 in: cut at 90 in from the start. Leaves 90 in and 101 7/8 in; kerf 1/8 in.
- Piece 101 7/8 in: cut at 90 in from the start. Leaves 90 in and 11 3/4 in; kerf 1/8 in.