Example · Linear cutting
Raised garden bed
A 6 × 3 ft raised garden bed with four rows of cedar 2×6. Four of the eight 12 ft boards yield one long side board and two short ones, the other four one long side board and a long offcut, because two 6 ft boards do not fit on one board once you allow for the kerf. The short boards are two thicknesses shorter because they sit between the long sides.
Open and edit in the plannerFree · No sign-up needed · Your data stays with you
Result
- 16 / 16 Parts placed
- 8 Stock pieces
- 16 cuts
- 72.9 % Material use
- 2 in Saw loss
- 71 7/8 in largest offcut
✓ Geometry independently validated
Your stock
- Cedar 2×6, 12 ft: 8 × 144 in · Available stock
Parts to cut
- Long side board: 8 × 72 in
- Short side board: 8 × 33 in
Rules
- Material group: Cedar · 2×6
- Saw kerf: 1/8 in
- Edge trim: 0 in
Cutting sequence · Stock piece 1
- Piece 144 in: cut at 72 in from the start. Leaves 72 in and 71 7/8 in; kerf 1/8 in.
- Piece 71 7/8 in: cut at 33 in from the start. Leaves 33 in and 38 3/4 in; kerf 1/8 in.
- Piece 38 3/4 in: cut at 33 in from the start. Leaves 33 in and 5 5/8 in; kerf 1/8 in.