Example · Linear cutting
Small tube frame
Three 10 ft steel tubes for a small frame with four legs and four braces. A typical case for metal tubing with a fixed kerf.
Open and edit in the plannerFree · No sign-up needed · Your data stays with you
Result
- 8 / 8 Parts placed
- 3 Stock pieces
- 8 cuts
- 66.7 % Material use
- 1 in Saw loss
- 95 7/8 in largest offcut
✓ Geometry independently validated
Your stock
- Steel tube, 10 ft: 3 × 120 in · Available stock
Parts to cut
- Leg: 4 × 36 in
- Brace: 4 × 24 in
Rules
- Material group: Steel tube · 1 in
- Saw kerf: 1/8 in
- Edge trim: 0 in
Cutting sequence · Stock piece 1
- Piece 120 in: cut at 36 in from the start. Leaves 36 in and 83 7/8 in; kerf 1/8 in.
- Piece 83 7/8 in: cut at 24 in from the start. Leaves 24 in and 59 3/4 in; kerf 1/8 in.
- Piece 59 3/4 in: cut at 24 in from the start. Leaves 24 in and 35 5/8 in; kerf 1/8 in.
- Piece 35 5/8 in: cut at 24 in from the start. Leaves 24 in and 11 1/2 in; kerf 1/8 in.